Skip to the content
Drive-Thru SOSGUIDE
All topics (8 of 13)
  1. 1What the board does
  2. 2Before you start
  3. 3Where to put the cameras
  4. 4Which lane type is mine?
  5. 5Set up the board
  6. 6Goals, the screen and alerts
  7. 7Using the board every day
  8. 8A TV with no PC: HDMI
  9. 9Reports
  10. 10Where alerts and reports go
  11. 11How the times are measured
  12. 12When something looks wrong
  13. 13Setup checklist

Drive-Thru SOS › Guide › A TV with no PC: the gateway's HDMI ports

8A TV with no PC: the gateway's HDMI ports

The gateway has two HDMI ports. One shows the gateway's own screen; the other can show the drive-thru board all day, on its own, with nobody signed in. A kitchen TV needs nothing but an HDMI cable.

Plug in the TVs

Any TV or monitor works; 1920×1080 is ideal. Use HDMI 2 for the kitchen TV (the board) and HDMI 1 for a screen in the office (the gateway's main screen). A USB mouse and keyboard on the gateway work the main screen.

Open Settings › Support › HDMI output

Each port is listed with the display it found (its make and model), whether its signal is on, and what it shows: Main screen or Insights TV.

Put the board on its own screen

Turn on Show an Insights dashboard on its own screen, choose Drive-thru (TV) under Dashboard, keep On port at HDMI 2 (default) (or the port the kitchen TV is on) and click Save. Both screens start again in about 15 seconds; the kitchen TV then shows the board in TV mode.

Check it from here

Identify screens shows each port's name on its TV for 10 seconds. Capture HDMI 1 and Capture HDMI 2 show, on this page, exactly what each TV is showing: check the kitchen TV from the office, or from anywhere through the gateway's remote address.

Settings › Support › HDMI output: an LG in the office on HDMI 1 (the main screen, Live View) and a Samsung in the kitchen on HDMI 2 showing the drive-thru board. At the bottom, the
Settings › Support › HDMI output: an LG in the office on HDMI 1 (the main screen, Live View) and a Samsung in the kitchen on HDMI 2 showing the drive-thru board. At the bottom, the captures of what each TV shows.
  • The board's screen needs no sign-in: it shows only that dashboard (and the dashboards in its TV list) and their cameras, nothing else of the gateway. It never sleeps, and after a restart or a power cut it comes back by itself. Choosing another dashboard reaches the TV within 30 seconds.
  • The main screen asks for a sign-in, then shows what Main screen says: Live View (camera wall), or an Insights dashboard in TV mode. It sleeps after 5 minutes without a mouse or key; any key wakes it. A dashboard keeps it awake.
Who can change itSettings › Support is for admins: sign in with an admin account to set the screens up.

Stuck on a step?

iLink Professionals supports owners and installers. Call, or send us a message.