Skip to the content
LineSenseGUIDE
All topics (3 of 13)
  1. 1What LineSense does
  2. 2Where it works
  3. 3Before you start
  4. 4Where to put the cameras
  5. 5Set up the board
  6. 6Times, alerts and who is told
  7. 7Using the board every day
  8. 8A TV with no PC: HDMI
  9. 9Reports
  10. 10Where alerts and reports go
  11. 11How the times are measured
  12. 12When something looks wrong
  13. 13Setup checklist

LineSense › Guide › Before you start

3Before you start

Ten minutes of preparation makes the setup a few clicks.

  • The gateway is running and you can sign in with an admin or manager account (a manager can make and change boards; Settings is for admins).
  • The cameras are added in Settings › Cameras / NVR and play in Live View. Any brand the gateway takes works, straight or through a recorder.
  • The cameras see the lines (section 4). A camera already over the registers is often fine as it is.
  • Analytics is on (Settings › Analytics): the board uses the gateway's own AI to find the people. Each board camera takes a share of the gateway's AI capacity, like any camera that counts people.
  • For alerts and reports: e-mail and/or WhatsApp set up in Settings › Notifications & Alerts (section 10), and the managers' e-mail addresses and WhatsApp numbers at hand.
  • Optional: a TV at the front end or in the office, plugged into one of the gateway's HDMI ports (section 8).

What you need, and what you don't

NeededNot needed
The iEdgeGW gateway, on the store's networkNo sensors in the ceiling, no counters at the doors, no beams across the lanes
Cameras that see the lines (most stores already have them)No new cameras where the existing ones see the registers
A browser (PC, tablet, phone) or a TV on the gateway's HDMINo PC at the front end, no app, no cloud subscription for the board

Stuck on a step?

iLink Professionals supports owners and installers. Call, or send us a message.