Skip to the content
LineSenseGUIDE
All topics (13 of 13)
  1. 1What LineSense does
  2. 2Where it works
  3. 3Before you start
  4. 4Where to put the cameras
  5. 5Set up the board
  6. 6Times, alerts and who is told
  7. 7Using the board every day
  8. 8A TV with no PC: HDMI
  9. 9Reports
  10. 10Where alerts and reports go
  11. 11How the times are measured
  12. 12When something looks wrong
  13. 13Setup checklist

LineSense › Guide › Setup checklist

Print this page

13Setup checklist

  • Cameras high at the register end, seeing each whole line, each register's spot and each cashier's place.
  • Analytics on; the cameras play in Live View.
  • A front counter board made, with the right store type.
  • Each register: its line drawn on the floor (Counted inside now matches the people waiting), its spot at the register, its cashier zone.
  • The times checked against the store's own standard (Times tab).
  • The alerts chosen, and who is told: names, roles, e-mail and WhatsApp.
  • E-mail and WhatsApp set up and tested in Notifications & Alerts.
  • The Front counter board row in Alert Outputs, and its When.
  • The front counter report scheduled (daily, weekly or monthly) to the right people.
  • Optional: a TV on the gateway's HDMI 2 showing the board; Capture HDMI 2 checked.
  • A busy hour watched on the board: the lines, the waits and the open registers look right.
Need a hand?Your iLink installer can set the board up with you, or check it remotely through the gateway's remote address. Have the store's hours, the managers' contacts and the registers' names at hand.

Stuck on a step?

iLink Professionals supports owners and installers. Call, or send us a message.